Contact Us
Free Assembly Cost for 5pcs,As Fast As 5 Working Days

PCB Surface Finish Options at NextPCB: HASL, ENIG, OSP, ENEPIG and More

PCB Surface Finish Options at NextPCB: HASL, ENIG, OSP, ENEPIG and More

PCB Surface Finish Options for Prototypes and Production

The surface finish protects your copper pads and decides how well your board solders, how flat the pads are for fine-pitch parts, and how long boards can be stored. The wrong choice can mean assembly defects or paying for more than your design needs.

NextPCB supports a full range of finishes, from HASL and ENIG to ENEPIG and hard gold.

Standard PCB quote

Instant pricing online

  • HASL
  • Lead-Free HASL
  • ENIG
  • OSP

Advanced PCB quote

Reviewed by our engineers

  • Immersion Silver
  • Immersion Tin
  • ENEPIG
  • Hard Gold
  • Gold Fingers
  • ENIG + OSP
  • Electroplated Gold
  • Gold Plating
  • Gold Finger Plating
  • Custom
2 mil

Min. trace width and spacing on advanced PCB orders

IPC Class 2

Default, Class 3 after engineering review

Certified

IATF 16949, ISO 13485 and ISO 9001. See our certificates

Surface Finishes We Support

Every finish we offer, what it is best for, and which quote page to use.

Standard PCB quote

Select online for instant pricing

Get a standard PCB quote
  • HASL (Leaded)

    Best for

    Low-cost boards where lead-free is not required

    • Tin-lead solder leveled with hot air
    • Listed as “HASL” in the quote form
    • Not RoHS-compliant
  • Lead-Free HASL

    Best for

    General-purpose and volume production

    • RoHS-compliant lead-free solder
    • Minimum BGA pad 10 mil
  • ENIG

    Best for

    Fine-pitch BGA and QFN, multiple reflow, long storage, industrial, medical, automotive and rigid-flex boards

    • Nickel 100–200 µin
    • Gold 1–3 µin
    • Minimum BGA pad 8 mil
  • OSP

    Best for

    Fine-pitch parts assembled promptly in a single pass

    • Thin organic film on bare copper
    • Very flat pads

Advanced PCB quote

Reviewed by our engineers

Get an advanced PCB quote
  • Immersion Silver

    Best for

    RF and high-frequency boards

    • Thin, flat silver layer
    • Keep boards sealed until assembly
  • Immersion Tin

    Best for

    Flat pads for small components

    • Flat, lead-free tin layer
    • Assemble promptly after delivery
  • ENEPIG

    Best for

    Mixed-technology assemblies and wire-bonded boards

    • ENIG with an added palladium layer
    • Supports soldering and wire bonding
  • Hard Gold and Gold Fingers

    Best for

    Edge connectors and frequently mated contacts

    • Electroplated nickel 120–200 µin
    • Electroplated gold 1–10 µin
    • Bevel angles 20°, 30°, 45° or 60°

Also listed in the advanced PCB quote form

  • ENIG + OSP
  • Electroplated Gold
  • Gold Plating
  • Gold Finger Plating
  • Custom

The advanced PCB quote also covers HASL, lead-free HASL, ENIG and OSP, so you can combine any finish with advanced board types such as HDI, rigid-flex and high-frequency boards.

Need help with a standard finish? Inquire here. For advanced PCB, contact vipsales@nextpcb.com.

How to Choose Your Surface Finish

Start from what your board needs to do.

  • If Your Board Is…ChooseWhy
  • A cost-sensitive prototype or general production runLead-Free HASLLow cost, good solderability and RoHS-compliant
  • Fine-pitch BGA, QFN or a dense layoutENIG, or OSP for a single assembly passFlat pads give consistent solder paste deposits
  • Industrial, medical or automotive, with rework or long storageENIGHandles multiple reflow cycles and stores well
  • RF or high-frequencyImmersion Silver or Hard GoldOur recommended finishes for low insertion loss
  • Rigid-flexENIGOur recommended finish for bending stress
  • Soldered and wire-bonded on the same boardENEPIGThe palladium layer supports both processes
  • Edge connector or frequently mated contactsHard Gold on gold fingersHard electroplated gold resists wear

For a full comparison of how each finish performs, read our PCB surface finish guide or HASL vs ENIG.

Design Details That Affect Your Finish

2 mil

Fine-Line Capability

Trace width down to 2 mil on advanced PCB orders. Flat finishes such as ENIG or OSP are the usual choice for layouts this dense.

10 / 8 mil

BGA Pad Size

Minimum pad diameter is 10 mil with HASL and 8 mil with ENIG. For rectangular pads, the shortest side is the reference.

5 mil

ENIG Pad Spacing

Keep at least 5 mil between adjacent gold fingers or pads in your design to avoid gold seepage.

20° 30° 45° 60°

Gold Finger Bevel

Angles of 20°, 30°, 45° or 60° with a ±5° angle tolerance and ±0.15 mm depth tolerance. See gold fingers.

POFV

Via-in-Pad

Filled and capped vias (POFV) are supported on advanced PCB orders. See via-in-pad.

Full Manufacturing Specifications

For layer count, materials, drill sizes, trace and spacing, solder mask, IPC class and the rest of our process limits, see the standard PCB capabilities and advanced PCB capabilities.

Check Before You Order

Review your files with the free online Gerber viewer or run a full analysis with HQDFM.

Why Order from NextPCB

  • Engineering support

    Upload your files to the advanced PCB quote and our engineers will review your design, including the finish you plan to use

  • Consistent quality

    100% E-test and AOI, with IATF 16949, ISO 13485 and ISO 9001 certification. See our certificates

  • Prototype to production

    The same quote workflow and quality system from a single prototype to volume orders

  • Assembly in one order

    Add PCB assembly at checkout so boards go straight to assembly with the finish you chose

FAQ

Which surface finishes can I order online?

The standard PCB quote offers HASL, lead-free HASL, ENIG and OSP. Immersion silver, immersion tin, ENEPIG, hard gold and gold fingers are available through the advanced PCB quote. The advanced PCB quote also lists ENIG + OSP, electroplated gold, gold plating, gold finger plating and a custom option.

Is HASL RoHS-compliant?

Leaded HASL is not. For RoHS-compliant boards choose lead-free HASL, ENIG or another lead-free finish. The quote form defaults to lead-free HASL, so check the surface finish field if your design requires a different finish.

Which finish is best for fine-pitch BGA?

ENIG is the usual choice. It gives flat pads and supports a smaller minimum BGA pad (8 mil, against 10 mil for HASL). OSP also gives flat pads when boards are assembled promptly in a single pass.

How thick is the gold on ENIG?

NextPCB applies 1–3 µin of gold over 100–200 µin of nickel. Gold thickness affects price.

Which finish is best for RF and high-frequency boards?

Immersion silver and hard gold are our recommended finishes for low insertion loss. Keep silver boards sealed until assembly to prevent tarnishing.

Which finish should I use for gold fingers?

Hard gold, which is electroplated nickel-gold built for repeated insertion. Select it on the advanced PCB quote and specify the bevel angle your connector needs.

Can NextPCB help me choose a finish?

Yes. Upload your files to the advanced PCB quote for an engineering review, or check them yourself with the free online Gerber viewer.

Want more detail on how a finish works before you order? These guides cover each one in depth.

Start Your PCB Quotation

Choose your surface finish in the quote form and get instant pricing. Need ENEPIG, immersion silver, immersion tin or hard gold? Use the advanced PCB quote.

PCB Portfolio
NextPCB Capabilities
PCB Type
High Tg PCBs
Ceramic PCBs
Aluminum PCBs
Rigid PCBs
Copper-Core PCBs
Thick Copper PCBs
High-frequency PCBs
Rogers PCBs
HDI PCB Manufacturing
High-Speed PCBs
Rigid-Flex PCB Manufacturing, Design & Cost Guide | NextPCB
Flexible PCB Manufacturer | Flexible PCB Fab - NextPCB
Metal Core PCBs
LED PCB
Applicable Industries
Automotive PCB & PCBA | IATF 16949 PCB | NextPCB
Power industry PCB
Medical PCB & PCBA | ISO 13485 Assembly | NextPCB
Security Industry PCB
Consumer Electronics PCB & PCBA | HDI & Flex | NextPCB
IoT PCB & PCBA | Rigid-Flex, Flex & HDI Boards | NextPCB
Industrial Automation PCB & PCBA | Heavy Copper | NextPCB
Communication PCB & PCBA | High-Speed & RF PCB | NextPCB
Testing & Inspection
AOI
Files & Requirements
more > Hot