Contact Us
Help >> How to export Gerber files from Eagle file

How to export Gerber files from Eagle file

What is Eagle software?

EAGLE is a scriptable electronic design automation (EDA) application with schematic capture, printed circuit board (PCB) layout, auto-router, and computer-aided manufacturing (CAM) features. EAGLE stands for Easily Applicable Graphical Layout Editor (German: Einfach Anzuwendender Grafischer Layout-Editor) and is developed by CadSoft Computer GmbH. The company was acquired by Autodesk Inc. in 2016. EAGLE contains a schematic editor, for designing circuit diagrams. Schematics are stored in files.SCH extension, parts are defined in device libraries with LBR extension. Parts can be placed on many sheets and connected together through ports.

The PCB layout editor stores board files with the extension.BRD. It allows back-annotation to the schematic and auto-routing to automatically connect traces based on the connections defined in the schematic.

When you finish your PCB design in Eagle, you can generate Gerber files that are needed by the PCB manufacturer. This NextPCB article is telling you how to export the Gerber file from Eagle software.


Step 1. Open the CAM Processor

Open your PCB layout (.brd) file in Eagle, Click the “ CAM” button or choose “File -> CAM Processor”.This will open the CAM Processor tool that is used to generate the files.



Step 2. Click File -> Open -> Job


Step 3. Then navigate to your default EAGLE cam folder, choose the file, and press Open.


Step 4. Adding a second silkscreen (Optional)


If you look at the Layer options, it doesn’t have a file for the silk screen bottom. But if you need a silkscreen on the bottom layer as well, follow these steps:


a. Click “Add”

b. Change the Section to something like “Silk Screen SOL”

c. Change File to “%N.pls”

d. Deselect all layers

e. Select layers 20 “Dimension”, 22 “blames” and 26 “blames”


Step 5. Select the Process Job button to create all of your Gerber files. You can find all of your generated Gerber files in the Autodesk EAGLEControl Panel in your project folder.


Step 6. Generating Your Drill File

a. Select the CAM Processor at the top of your interface or

select File » CAM Processor to open the CAM processor dialog.


b. You now need to load a drill CAM job to get things started. Select File » Open » Job,

and in your default EAGLE cam folder select the excellent. cam file, then select Open.


c. you'll now have a single Generate drill data tab available, which will grab the data from layers 44 Drills and

45 Holes, just what you need. Select the Process Job button to generate this file.


After those steps, Gerber files and Drill data have been exported from Eagle software.

Feel free to contact us:

if you have any more questions.