April 03, 2018
The significance, classification and composition of electronic circuit diagram
March 30, 2018
The pad design is designed to achieve the smallest diameter, which is at least 0.5 mm greater than the maximum diameter of the weld terminal orifice flange. The test pads must be provided for all nodes in accordance with ANSI/IPC 2221. Nodes are two or Electrical connection points between multiple components. A test pad requires a signal name (nodal signal name), the xy coordinate axis associated with the reference point of the printed circuit board, and the test pad's coordinate position (describe the test pad On which side of the printed circuit board). The information needed to provide fixtures for SMT will also need to be printed on the assembly technique of the circuit board assembly to "fix the device in the circuit test" or commonly referred to as "fixed nail bed." With the help of devices" to promote testability in the circuit. In order to achieve this purpose, you need to:
March 29, 2018
PCB shape and size are determined by the placement machine's PCB transmission method and mounting area.
March 28, 2018
March 27, 2018
Schematic design software, ORCAD is OK. Netlist is basically the industry standard.