Blog >> Blog Details Page
Right-angle alignment will have any impact in PCB layout
Posted:03:05 PM December 26, 2017 writer: G

Right-angle alignment of the signal impact is mainly reflected in three aspects: First, the corner can be equivalent to the capacitive load on the transmission line, slow down the rise time; Second, the impedance discontinuity will cause the signal reflection; Third, the parasitic capacitance at the right angle of the transmission line can be calculated from the following empirical formula: C = 61W (Er) 1/2 / Z0. In the above equation, C refers to the equivalent capacitance of the corner (in pF), W refers to the width of the trace (unit: inch), εr refers to the dielectric constant of the medium, and Z0 is the characteristic impedance of the transmission line.

As the line width of the rectangular alignment increases, the impedance there will be reduced, so there will be a certain signal reflection phenomenon. The equivalent impedance after the line width increase can be calculated according to the impedance calculation formula, and then the reflection coefficient is calculated according to empirical formula: ρ = (Zs-Z0) / (Zs + Z0), the impedance change caused by the normal right-angle alignment is between 7% and 20%, so the maximum reflection coefficient is about 0.1.


  • PCB
    Prototype
  • PCB
    Assembly
  • SMD
    Stencil

Dimensions: (mm)

×

Quantity: (pcs)

5
5
10
15
20
25
30
40
50
75
100
120
150
200
250
300
350
400
450
500
600
700
800
900
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
7500
8000
9000
10000

Other Quantities:(quantity*length*width is greater than 10㎡)

OK

Layers:

Thickness:

Quote now