Contact Us
Blog >> Blog Details Page

About PCB Place inspection and processing

Posted:06:45 PM December 25, 2018 writer: G

There are two ways to layout, one is interactive layout, the other is automatic layout. Generally, it is adjusted by interactive layout based on automatic layout. In the layout, the gate circuit can be re-routed according to the condition of the wiring. Allocation, the two gates are swapped, making it an optimal layout for easy routing. After the layout is completed, the design file and related information can be returned and marked in the schematic diagram, so that the relevant information in the PCB board is consistent with the schematic diagram, so that the future creation and modification of the design can be synchronized, and at the same time, the simulation is performed. The information is updated to enable board-level verification of the electrical performance and functionality of the circuit.

1. Consider the overall beauty

The success of a product, one must pay attention to the internal quality, and the second is to take into account the overall aesthetics, both of which are perfect to consider the product to be successful.

On a PCB board, the layout of components must be balanced, orderly, and not top-heavy or sinking.

2. Layout check

Does the printed board size match the size of the machined drawing? Can it meet the PCB manufacturing process requirements? Is there a positioning marker?

Are there any conflicts between components in 2D and 3D space?

Are the component layouts dense and orderly, neatly arranged? Is it all finished?

Can components that need to be replaced frequently be replaced easily? Is it convenient to insert the board into the device?

Is there a proper distance between the thermal element and the heating element?

Is it convenient to adjust the adjustable components?

Where is the heat sink installed where heat is needed? Is the air flow smooth?

Is the signal flow smooth and the shortest interconnected?

Is the plug, socket, etc. contradicting the mechanical design?

Is the interference problem of the line considered?

Tag: pcb layout pcb place pcb processing
  • PCB
    Prototype
  • PCB
    Assembly
  • SMD
    Stencil

Dimensions: (mm)

×

Quantity: (pcs)

5
5
10
15
20
25
30
40
50
75
100
120
150
200
250
300
350
400
450
500
600
700
800
900
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
7500
8000
9000
10000

Other Quantities:(quantity*length*width is greater than 10㎡)

OK

Layers:

Thickness:

Quote now